Home > LAWN & GARDEN
We found 27 results matching your criteria.
Sort By:
1
Bonide MoleMax 692 Mole and Vole Repellent Rubbermaid 1840999 Commercial Water Cooler Perky Pet Squirrel-Be-Gone II 338GFCI Squirrel Proof Wild Bird Feeder
Bonide Mole and Vole Repellent, Bonide, Series: MoleMax, 10 lb Capacity, Composition: Ricinus Communis Oil, Granular, Brown, Musty Organic Odor, 500 sq-ft Coverage, 3 months Shelf, Used Around Children, Plants and Pets Rubbermaid Water Cooler, Heavy Duty, Polyethylene, Rubbermaid, 5 gal Storage, Orange, 14-3/4 in Length, 12-7/8 in Width, 18-7/8 in Height Perky Pet Wild Bird Feeder, Classic Country, Squirrel Proof, Metal, Perky Pet, Series: Squirrel-Be-Gone II, 12 lb Volume, 14 in Width, 11 in Length, 14 in Height, Hanging/Pole Mounting, For Protecting Seed from Squirrels and Nuisance Birds
HAND TRUCK PNEUM TIRES 800 LBS CART GARDEN STL W/SIDE 1200 LB Smokey Mountain Cooker 721001 Smoker
Prosource Hand Truck, Convertible, Heavy Duty, 800 lb Load Capacity, 10 x 3-1/2 in Wheel, Pneumatic Tires Wheel, Adjustable Handle, 54-1/4- 58-1/4 in Height x 21-1/4 in Width x 17-1/4 Depth Vertical Position, 44-1/2 in Height x 21-1/4 in Width x 48-3/4 in Depth Horizontal Position, Steel Frame, Powder-Coated, Matte Black, 1 in Dia Frame, 4 x 1-1/4 in TPR Casters, 14 in Width x 7-3/4 in Depth Toe Plate 1200 lbs. (550 kgs) load capacity. 30'' x 7/8'' dia. steel pull handle. 13'' pneumatic wheels with steel rim. Heavy gauge steel construction with reinforced sides for greater strength. Easy to operate pins allow the sides to be locked upright, folded down or removed for transporting oversized items. Mesh body bed. Smokey Mountain Cooker Smoker, Aluminum Vent, Smokey Mountain, Cooker, Model: 721001, 480 sq-in Cooking, Wood Fuel, Manual Ignition, 2 Cooking Racks, Weatherproof Handle, 18-1/2 in Overall Width, 21 in Overall Depth, 47 in Overall Height, Black, ANSI Certified, CSA Certified, For Slow Cooking Chicken, Turkey, Ham and More
Standard Perforated Picnic Tables Standard Perforated Picnic Tables Standard Perforated Picnic Tables
Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

Portable Mount

Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.

Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Standard Perforated Picnic Tables
Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Portable Mount

Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.

Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Surface Mount
Most surface mount fixtures have holes in the legs of the furniture for bolts to be inserted into anchors embedded in concrete. When installing, holes must be drilled into existing concrete surfaces to embed anchors for the bolts. Furniture with tubular understructure has discs welded to the understructure which rest flat on the ground so that bolts and anchors can then be secured through the discs. Surface mount furniture is placed on a concrete surface.
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Portable Mount

Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.

Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Surface Mount
Most surface mount fixtures have holes in the legs of the furniture for bolts to be inserted into anchors embedded in concrete. When installing, holes must be drilled into existing concrete surfaces to embed anchors for the bolts. Furniture with tubular understructure has discs welded to the understructure which rest flat on the ground so that bolts and anchors can then be secured through the discs. Surface mount furniture is placed on a concrete surface.
Steel Plank Y-Base Perforated Metal ADA Picnic Table Steel Plank Y-Base Perforated Metal ADA Picnic Table
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.


Portable Mount
Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.


Surface Mount
Most surface mount fixtures have holes in the legs of the furniture for bolts to be inserted into anchors embedded in concrete. When installing, holes must be drilled into existing concrete surfaces to embed anchors for the bolts. Furniture with tubular understructure has discs welded to the understructure which rest flat on the ground so that bolts and anchors can then be secured through the discs. Surface mount furniture is placed on a concrete surface.
Steel Plank Y-Base Perforated Metal ADA Picnic Table Standard Perforated Picnic Tables
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Portable Mount

Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.

Steel Plank Y-Base Perforated Metal ADA Picnic Table
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

Surface Mount
Most surface mount fixtures have holes in the legs of the furniture for bolts to be inserted into anchors embedded in concrete. When installing, holes must be drilled into existing concrete surfaces to embed anchors for the bolts. Furniture with tubular understructure has discs welded to the understructure which rest flat on the ground so that bolts and anchors can then be secured through the discs. Surface mount furniture is placed on a concrete surface.
Features
• Solid steel construction is rot, decay and insect-proof
• Perforated steel plank tops
• Black powder coated understructure
• Six powder coat tabletop colors

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.


Portable Mount
Portable mounts may have surface mount holes in the legs of the furniture, but if the pieces are not secured with bolts and anchors, the furniture may be moved. Furniture with a tubular understructure has no surface mounting holes. Portable Mount furniture may be placed on any surface.
Steel Plank Y-Base Perforated Metal ADA Picnic Table Steel Plank Y-Base Perforated Metal ADA Picnic Table Standard Perforated Picnic Tables
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.


Surface Mount
Most surface mount fixtures have holes in the legs of the furniture for bolts to be inserted into anchors embedded in concrete. When installing, holes must be drilled into existing concrete surfaces to embed anchors for the bolts. Furniture with tubular understructure has discs welded to the understructure which rest flat on the ground so that bolts and anchors can then be secured through the discs. Surface mount furniture is placed on a concrete surface.
The 8 ft. steel plank ADA table’s leg structure has been given our innovative Y-Base leg design that makes it ADA compliant while maintaining full seating down both sides of the table.

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
Features:
• Perforated seats & tops
• Black powder coated understructure
• Thermoplastic coated
• Optional anti-skateboard tabs
• Handicap access is available for this model

In-Ground Mount
In-ground mounted furniture resembles surface mounted furniture, but includes "J-Rods" to be inserted through the surface mount holes on a piece of furniture. The bottom of the J-Rod is then embedded in a hole filled with concrete. When the concrete cures, the shape of the J-Rod secures the furniture. Benches that have tubular legs and are in-ground mounted do not use J-Rods. Instead, the understructure ends in approximately 18" of extra pipe (see far right) with a piece of flatbar welded to the bottom. A deep hole is then dug and filled with concrete. The bench is then set in the concrete to cure. In-ground mounted furniture is placed on a grass or soil surface.
   
 
1